PERFORMANCE OF THE DEVICE:
Power thermal 195 kW
Exchange (thermal margin) surface 777 m2 (-4.9%)
Fluid MEG 30%
Temperature entry / exit 35 / 31 ° C
Flow in entry 0.01257 m3/s
Load loss 59.5 kPa
SIZE and weight for 1 unit (Position manifold entrance: on the right in the direction of the air)
Overall width: 1110 mm
Overall length: 6820 mm
Overall height: 1375 mm
Empty Weight: 998 kg +/-10%
4 motor-fan groups:
Rotation speed: 890 RPM
Propeller-blade aluminum + D 900 mm Polypropylene
Engine class F - IP54 - Three-phase 400V 50 Hz
4 x 1 830 W - 4 x 3.51 A - 890 RPM (coupling triangle)
Connection (s) electric (s): on line boxes engines without Cabinet option, otherwise cable engines and
connected to the Cabinet
ACCESSORIES FOR 1 UNIT
-Cabinet regulation with Aeroconnect (x 1)
IP54 cabinet with 1 switch-disconnector general, 1 magnetic circuit breaker by fans, 1 line
contactor by floor, the engines PTO connection, regulation by card Aeroconnect, setting
following instructions supplied, 1 synthesis defect, 4 floor (s), power supply Three-phase 50 Hz 400V + N,.
Main functions of Aeroconnect: regulation of temperature or pressure, communication via bus (MODBUS Protocol), balancing the operating time of the floors, 2 set points, management free-cooling, misting, desk with LCD screen allowing easy setup and access operation information (set point, temperature or pressure,...) or defects.
If the device is associated with a cold CIAT group, allow the BUS by shielded cable connection between cabinets of the 2 devices.
-Temperature probe (x 1) fluid 90 ° C max - 6 m cable - thermowell G1/2 "mounted on the manifold of entry except for the free-cooling (upstairs above the valve)
-Protection of the fins (x 1) steel fence painted RAL 7035, mesh 12.7 mm x 25.4 mm
Seller assumes all responsibility for this description. Auctelia does not act as representative for this sale.
List of items